1050 Grain Auger Cart
The 1050 Harvest Commander®
has a 1,050 bushel capacity and a powerful auger system for faster
unloading. The 1050 empties in approximately 2.1 minutes with the ability to empty at a rate of 500-600
bushels per minute. This is courtesy of the cart’s 20" vertical auger encased in a 22" tube.
Features
-
On-Demand Positive Drive
More power, less maintenance and 50% greater starting torque. This unique, "quiet" positive drive system gives you natural, unrestricted grain flow "on demand", plus greater efficiency and horsepower utilization. Chains and sprockets are not required resulting in fewer wear parts and less daily maintenance.
On-Demand Positive Drive
More power, less maintenance and 50% greater starting torque.
-
Low Profile Design
The classic signature design of the low-profile Kinze Grain Cart combined with unmatched strength and stability, makes Kinze Grain Carts structurally superior to anything else in the field. And, now you have even greater unloading height, auger reach and grain-handling capacity.
Low Profile Design
The classic signature design of the low-profile Kinze Grain Cart combined with unmatched strength and stability.
-
PTO
1-3/4"-20 spline PTO shafts come with 4-lobe overrunning and torque limiting clutches. The 1050 uses
8-groove sheaves with two 4-band, multi-strand V-belts. 1050 PTO shafts: 1000 RPM, 220 HP rated.
PTO
1-3/4"-20 spline PTO shafts come with 4-lobe overrunning and torque limiting clutches.
-
Large Front and Rear Windows
Makes it easier to monitor grain levels and provide a limited view through the rear of the wagon.
Large Front and Rear Windows
Makes it easier to monitor grain levels and provide a limited view through the rear of the wagon.
-
Transport Safety Chain Packages
Includes two 40,500 lb. rated and certified 1/2" auxiliary safety chains with mounting hardware.
Transport Safety Chain Packages
Includes two 40,500 lb. rated and certified 1/2" auxiliary safety chains with mounting hardware.
-
Full, Reinforced Safety Grating
Minimizes the risk of suffocation or entanglement.
Full, Reinforced Safety Grating
Minimizes the risk of suffocation or entanglement.
-
10,000 lb. Rated Jacks
Center mounted between the forward hitch frame and below the PTO. For better ground clearance and protection, the jack handle is used to pivot the jack between the vertical use position and horizontal storage position. A single-speed jack is used on the 850 model and a two-speed jack is used on the 1050 model.
10,000 lb. Rated Jacks
Center mounted between the forward hitch frame and below the PTO.
-
1050 Sof-Tred
The 1050 Sof-Tred (76" x 50" x32") 16-ply flotation tires on rugged 44" x 32" one-piece, drop-center rims. Formed wheel wells are located in the center section of the lower grain tub allowing wheels to be set on 96" centers, reducing transport width to just 12' 2".
1050 Sof-Tred
The 1050 Sof-Tred (76" x 50" x32") 16-ply flotation tires on rugged 44" x 32" one-piece, drop-center rims.
-
1050 Row Crop
The 1050 Row Crop Axles/Wheels let you choose from 20.8" x 38" or 18.4" x 42" Radial R-1 tires. A unique axle mounting lets you set spacings from 30" to 40" rows. Reversible rims provide narrow (30") or wide spacing between the tires.
1050 Row Crop
The 1050 Row Crop Axles/Wheels let you choose from 20.8" x 38" or 18.4" x 42" Radial R-1 tires. A unique axle mounting lets you set spacings from 30" to 40" rows.
-
1050 Sof-Traks
The 1050 Sof-Traks for the ultimate flotation system - select 24" or 36" tracks. Cast iron-segmented end wheel design greatly reduces daily inspection and maintenance as opposed to higher-maintenance rubber-tire end wheel configurations. Adjustable axle widths allow you to center tracks on 108" or 120".
1050 Sof-Traks
The 1050 Sof-Traks for the ultimate flotation system - select 24" or 36" tracks.
Attachments
-
Optional Electronic Scale
Rugged, 3-point scale system (factory- or dealer-installed) features two 50,000-lb. rated
compression-type (CT) load cells at the rear of the axle assembly and a 3-3/4" hitch weigh beam. The
package includes a Digi-Star® EZ 2000 printer-ready console, heavy-duty cables and a water-resistant
junction box.
Optional Electronic Scale
Rugged, 3-point scale system features two 50,000-lb. rated compression-type load cells at the rear of
the axle assembly and a 3-3/4" hitch weigh beam.
-
Data Down Loader Kit
Includes data utility software to run on computer with Windows 98/2000 operating systems, computer
interface cable, data down loader module and module cable. Module will store up to 1600 lines (64K
bytes) of load data including load ID number, time, date and weights.
Data Down Loader Kit
Module stores up to 1600 lines (64K bytes) of load data including load ID number, time, date and
weights.
-
Roll Tarp Package (Dealer Installed)
Includes galvanized end caps, aluminum side-mount latch plate, recessed tarp straps, 21-position
u-joint for tarp tension adjustment, stretch cord roll return, two ridge straps, long crank with
retainer, five high-rise (10"-12") tarp bows, black 18 oz. vinyl-coated fabric tarp, universal single
bow bracket, and mounting hardware for dealer installation using laser cut mounting holes (2008-on
production).
Roll Tarp Package (Dealer Installed)
An 18 oz. black vinyl-coated fabric tarp protects grain from harsh weather conditions.