| Specifications | 12R N 30 Mechanical | 12R N 30 EdgeVac® |
|---|---|---|
| Planter Type: | Pull type; three-section flex; hydraulic operation | |
| Meter Type: | Mechanical | EdgeVac |
| Rows: | 12 | |
| Hopper Capacity: | 1.90 bushels | 1.75 bushels |
| Seed Delivery System: | On Row Hoppers | |
| Row Spacing: | 30" | |
| Wings: | Center Frame (six rows) and Two wings (three rows) | |
| Flexibility: | 13° of flex up and down at each wing | |
| Seed Transmission: | Seed rate control module with singl- motor hydraulic drive, required harnesses and speed sensors | |
| Hydraulic Lift System: | Rockshaft lift mechanism and two master, two slave rephasing | |
| Pull Row Units: | Double-disc "V" openers [see features] | |
| Air Clutches: | Air clutch control module with drill shaft-mounted, single-row air clutches (four sections), electronic-over-air valves and 50 psi maximum mini-regulator | |
| Weight Transfer Mechanism: | Hydraulically operated weight transfer mechanism for balanced weight transfer across the toolbar and rockshaft lift mechanism for increased hitch clearance | |
| PMM Seed Monitoring: | PMM Seed Monitoring with harness and computerized "smart" seed sensors | |
| Drive System: | Seed rate control module with single-motor hydraulic drive, required harnesses and speed sensors | |
| Drive/Drill Shafts: | 7/8" hex drive shafts with telescoping U-joints | |
| Tires - Transport: | Four 41" x 11" R22.5", Load Range H, tubeless rib implement | |
| Tires - Wing/Lift: | 7.50" x 20", 8-ply, tubeless rib implement (one tire per wing) | |
| Toolbar: | Two parallel 4" x 7" x 1/4" tubes with three-section flex | |
| Center Post: | 7" x 7" center post with UHMW plastic wear pads | |
| Parking Jack: | 7000 lbs. side-crank | |
| Standard Safety Chain: | One 40,500 lbs. rated 1/2" chain | |
| Transport Lights & Signs: | Safety/warning lights with ASAE connector; SMV sign | |
| Tongue/Hitch: | Telescoping, hydraulically operated, adjustable-height cast-iron single-clevis hitch | |
| Dimensions: | ||
| Base Weight: | 15,040 lbs. | 15,450 lbs. |
| Width - Transport: | 11' 2" | |
| Width - Planting: | 32' 11" | |
| Height - Transport: | 11' 11" | |
| Length - Transport: | 39' 2" | |
| Length - Planting: | 23' 9" | |
| Specifications | 12R N 30 ASD | 12R N 30 ASD EdgeVac® | ||||||
|---|---|---|---|---|---|---|---|---|
| Planter Type: | Pull type; three-section flex; hydraulic operation | |||||||
| Meter Type: | Mechanical | EdgeVac | ||||||
| Rows: | 12 | |||||||
| Hopper Capacity: | 110 bushels | |||||||
| Seed Delivery System: | Air Seed Delivery (ASD) | |||||||
| Row Spacing: | 30" | |||||||
| Wings: | Center Frame (six rows) and Two wings (three rows) | |||||||
| Flexibility: | 13° of flex up and down at each wing | |||||||
| Seed Transmission: | Seed rate control module with singl- motor hydraulic drive, required harnesses and speed sensors | |||||||
| Hydraulic Lift System: | Rockshaft lift mechanism and two master, two slave rephasing | |||||||
| Pull Row Units: | Double-disc "V" openers [see features] | |||||||
| Air Clutches: | Air clutch control module with drill shaft-mounted, single-row air clutches (four sections), electronic-over-air valves and 50 psi maximum mini-regulator | |||||||
| Weight Transfer Mechanism: | Hydraulically operated weight transfer mechanism for balanced weight transfer across the toolbar and rockshaft lift mechanism for increased hitch clearance | |||||||
| PMM Seed Monitoring: | PMM Seed Monitoring with harness and computerized "smart" seed sensors | |||||||
| Drive System: | Seed rate control module with single-motor hydraulic drive, required harnesses and speed sensors | |||||||
| Drive/Drill Shafts: | 7/8" hex drive shafts with telescoping U-joints | |||||||
| Tires - Transport: | Four 41" x 11" R22.5", Load Range H, tubeless rib implement | |||||||
| Tires - Wing/Lift: | 7.50" x 20", 8-ply, tubeless rib implement (one tire per wing) | |||||||
| Toolbar: | Two parallel 4" x 7" x 1/4" tubes with three-section flex | |||||||
| Center Post: | 7" x 7" center post with UHMW plastic wear pads | |||||||
| Parking Jack: | 7000 lbs. side-crank | |||||||
| Standard Safety Chain: | One 40,500 lbs. rated 1/2" chain | |||||||
| Transport Lights & Signs: | Safety/warning lights with ASAE connector; SMV sign | |||||||
| Tongue/Hitch: | Telescoping, hydraulically operated, adjustable-height cast-iron single-clevis hitch | |||||||
| Dimensions: | ||||||||
| Base Weight: | 17,120 lbs. | 17,450 lbs. | ||||||
| Width - Transport: | 11' 2" | |||||||
| Width - Planting: | 32' 11" | |||||||
| Height - Transport: | 12' 11" | |||||||
| Length - Transport: | 39' 2" | |||||||
| Length - Planting: | 23' 9" | |||||||
| ASD Fill Height: | 8' 5" | |||||||
| Specifications | 16R N 30 Mechanical | 16R N 30 EdgeVac® | ||||||
|---|---|---|---|---|---|---|---|---|
| Planter Type: | Pull type; three-section flex; hydraulic operation | |||||||
| Meter Type: | Mechanical | EdgeVac | ||||||
| Rows: | 16 | |||||||
| Hopper Capacity: | 1.90 bushels | 1.75 bushels | ||||||
| Seed Delivery System: | On Row Hoppers | |||||||
| Row Spacing: | 30" | |||||||
| Wings: | Center Frame (six rows) and Two wings (five rows) | |||||||
| Flexibility: | 13° of flex up and down at each wing | |||||||
| Seed Transmission: | Seed rate control module with singl- motor hydraulic drive, required harnesses and speed sensors | |||||||
| Hydraulic Lift System: | Rockshaft lift mechanism and two master, two slave rephasing | |||||||
| Pull Row Units: | Double-disc "V" openers [see features] | |||||||
| Air Clutches: | Air clutch control module with drill shaft-mounted, single-row air clutches (four sections), electronic-over-air valves and 50 psi maximum mini-regulator | |||||||
| Weight Transfer Mechanism: | Hydraulically operated weight transfer mechanism for balanced weight transfer across the toolbar and rockshaft lift mechanism for increased hitch clearance | |||||||
| PMM Seed Monitoring: | PMM Seed Monitoring with harness and computerized "smart" seed sensors | |||||||
| Drive System: | Seed rate control module with single-motor hydraulic drive, required harnesses and speed sensors | |||||||
| Drive/Drill Shafts: | 7/8" hex drive shafts with telescoping U-joints | |||||||
| Tires - Transport: | Four 41" x 11" R22.5", Load Range H, tubeless rib implement | |||||||
| Tires - Wing/Lift: | 7.50" x 20", 8-ply, tubeless rib implement (two tires per wing) | |||||||
| Toolbar: | Two parallel 4" x 7" x 1/4" tubes with three-section flex | |||||||
| Center Post: | 7" x 7" center post with UHMW plastic wear pads | |||||||
| Parking Jack: | 7000 lbs. side-crank | |||||||
| Standard Safety Chain: | One 40,500 lbs. rated 1/2" chain | |||||||
| Transport Lights & Signs: | Safety/warning lights with ASAE connector; SMV sign | |||||||
| Tongue/Hitch: | Telescoping, hydraulically operated, adjustable-height cast-iron single-clevis hitch | |||||||
| Dimensions: | ||||||||
| Base Weight: | 18,460 lbs. | 18,400 lbs. | ||||||
| Width - Transport: | 11' 2" | |||||||
| Width - Planting: | 42' 11" | |||||||
| Height - Transport: | 11' 11" | |||||||
| Length - Transport: | 49' 2" | |||||||
| Length - Planting: | 26' 3" | |||||||
| Specifications | 16R N 30 ASD | 16R N 30 ASD EdgeVac® |
|---|---|---|
| Planter Type: | Pull type; three-section flex; hydraulic operation | |
| Meter Type: | Mechanical | EdgeVac |
| Rows: | 16 | |
| Hopper Capacity: | 110 bushels | |
| Seed Delivery System: | Air Seed Delivery (ASD) | |
| Row Spacing: | 30" | |
| Wings: | Center Frame (six rows) and Two wings (five rows) | |
| Flexibility: | 13° of flex up and down at each wing | |
| Seed Transmission: | Seed rate control module with singl- motor hydraulic drive, required harnesses and speed sensors | |
| Hydraulic Lift System: | Rockshaft lift mechanism and two master, two slave rephasing | |
| Pull Row Units: | Double-disc "V" openers [see features] | |
| Air Clutches: | Air clutch control module with drill shaft-mounted, single-row air clutches (four sections), electronic-over-air valves and 50 psi maximum mini-regulator | |
| Weight Transfer Mechanism: | Hydraulically operated weight transfer mechanism for balanced weight transfer across the toolbar and rockshaft lift mechanism for increased hitch clearance | |
| PMM Seed Monitoring: | PMM Seed Monitoring with harness and computerized "smart" seed sensors | |
| Drive System: | Seed rate control module with single-motor hydraulic drive, required harnesses and speed sensors | |
| Drive/Drill Shafts: | 7/8" hex drive shafts with telescoping U-joints | |
| Tires - Transport: | Four 41" x 11" R22.5", Load Range H, tubeless rib implement | |
| Tires - Wing/Lift: | 7.50" x 20", 8-ply, tubeless rib implement (two tires per wing) | |
| Toolbar: | Two parallel 4" x 7" x 1/4" tubes with three-section flex | |
| Center Post: | 7" x 7" center post with UHMW plastic wear pads | |
| Parking Jack: | 7000 lbs. side-crank | |
| Standard Safety Chain: | One 40,500 lbs. rated 1/2" chain | |
| Transport Lights & Signs: | Safety/warning lights with ASAE connector; SMV sign | |
| Tongue/Hitch: | Telescoping, hydraulically operated, adjustable-height cast-iron single-clevis hitch | |
| Dimensions: | ||
| Base Weight: | 20,020 lbs. | 20,400 lbs. |
| Width - Transport: | 11' 2" | |
| Width - Planting: | 42' 11" | |
| Height - Transport: | 12' 11" | |
| Length - Transport: | 49' 2" | |
| Length - Planting: | 26' 3" | |
| ASD Fill Height: | 8' 5" | |
| Tractor Hydraulic Requirements | Requirements | Description |
|---|---|---|
| Base Machine With Mechanical Meters And Hydraulic Seed Rate Control: | 3 SCV | 20 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V Control Console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer |
| Base Machine With Mechanical Meters, Air Seed Delivery (ASD) System And Hydraulic Seed Rate Control: | 4 SCV | 35 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V Control Console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer #4 SCV: Air Seed Delivery System |
| Base Machine With Mechanical Meters, Air Seed Delivery (ASD) System And Hydraulic Seed Rate Control With Tractor Mounted PTO Pump: | 3 SCV | 25 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V Control Console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer |
| Base Machine With EdgeVac Meters And Hydraulic Seed Rate Control: | 4 SCV | 40 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with manual selector valve) #3 SCV: EdgeVac Fan #4 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer |
| Base Machine With EdgeVac Meters And Hydraulic Seed Rate Control With Tractor Mounted PTO Pump: | 3 SCV | 25 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V control console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer |
| Base Machine With EdgeVac Meters, Air Seed Delivery (ASD) System And Hydraulic Seed Rate Control: | 5 SCV | 55 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V control console) #3 SCV: EdgeVac Fan #4 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer #5 SCV: Air Seed Delivery System |
| Base Machine With EdgeVac Meters, Air Seed Delivery (ASD) System And Hydraulic Seed Rate Control With Tractor Mounted PTO Hydraulic Pump: | 4 SCV | 40 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V control console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer #4 SCV: Air Seed Delivery System |
| Base Machine With EdgeVac Meters, Air Seed Delivery (ASD) System And Hydraulic Seed Rate Control With Planter Mounted PTO Hydraulic Pump: | 3 SCV | 25 GPM | #1 SCV: Planter Lift #2 SCV: Markers/Fold (with 12V control console) #3 SCV: Hydraulic Seed Rate Control/Hydraulic Weight Transfer |